Spherical Y₂O₃ granules at ≥ 99.99% (4N), D50 15 to 25 µm. Feedstock for atmospheric plasma spray.

Target limits for qualification batches. Measured values for each delivery are reported on the batch Certificate of Analysis, which takes precedence over this page. Coating properties (porosity, hardness, adhesion, erosion rate) depend on torch, parameters and substrate and are not specified here.
| Tier | Container |
|---|---|
| 1 kg | HDPE container |
| 5 kg | HDPE container |
| 25 kg | Fibre drum with PE liner |
Limits on this page are the design targets of the development programme. Each delivery ships with a Certificate of Analysis carrying the measured values.
Sample quantities for qualification: 1 to 5 kg per cut. Where a published grade does not fit the requirement, a paid evaluation puts your specification through the same measurement stack.
Request a paid evaluationAgglomerated and sintered granules, D50 15 to 25 µm, D90 ≤ 45 µm. Hall flow ≤ 60 s / 50 g to ASTM B213, apparent density 1.4 to 2.0 g/cm³ to ASTM B212.
YSP-40/20 is intended for dense, smooth coatings and standard APS nozzles. Fines below 5 µm ≤ 5% by volume, hollow or fractured granules ≤ 10% by number.
≥ 99.99% Y₂O₃ on a total oxide basis, Y₂O₃/TREO ≥ 99.995%, ≤ 100 ppm total impurities. Limits are published element by element and reported on every batch.
Quantities are quoted directly and formulation runs through engineering.