World Space Week / / / 4-10 Oct →
Strocera

Halogen-plasma erosion barriers.

Y₂O₃ spray feedstock for erosion barriers on aluminium, stainless steel and ceramic substrates exposed to halogen plasma.

STROCERA / / / Yttria Thermal Spray Powder / / / Semiconductor Equipment
[ 01 ]The challenge

Halogen plasma attacks the substrate wherever it is exposed. Aluminium, stainless steel and ceramic parts each need a barrier layer that stays in place through the process and keeps particle generation low. Coating performance depends on the torch, the parameters and the substrate, so a feedstock with shifting chemistry or flow adds a variable the coating process cannot absorb.

Schematic, illustrativeYttria Thermal Spray Powder
[ 02 ]The Strocera approach

YSP-40 gives the coating process a defined starting point. Impurities are limited element by element, from Fe₂O₃ ≤ 10 ppm to Al₂O₃ ≤ 20 ppm and other rare-earth oxides ≤ 50 ppm, and chloride is held to ≤ 50 ppm. Fines below 5 µm are limited to ≤ 5% by volume. Coating properties are not specified on the datasheet, because they depend on your torch, parameters and substrate.

Full Yttria Thermal Spray Powder spec
[ 03 ]Specifications for this use case
Property
Value
Method
Purity, Y₂O₃, total oxide basis
≥ 99.99% (4N), ≤ 100 ppm total impurities
ICP-MS / ICP-OES
Y₂O₃ / TREO
≥ 99.995%
ICP-MS
D50, median
15 to 25 µm
ISO 13320
Fines, < 5 µm
≤ 5% by volume
Laser diffraction
Apparent density
1.4 to 2.0 g/cm³
ASTM B212
[ 04 ]Validation status
Pending

Target specification for qualification batches. Reference APS data will follow with the first qualified batches.

[ 05 ]Customer profile

Process and coating engineers specifying a barrier layer for plasma-exposed Al, SS and ceramic parts.

[ 06 ]Adjacent use cases

Engineers working on this often also evaluate:

Bring your specification for Halogen-plasma erosion barriers.

Tell us the operating conditions. We'll formulate Yttria Thermal Spray Powder to your application, and ship spray feedstock matched to your process.