APS feedstock for the yttria coatings on liners, rings and showerheads in plasma-etch and deposition chambers.
Liners, rings and showerheads sit directly in the plasma. Every process cycle exposes them to fluorine and chlorine chemistry, and any material lost from the part can end up as a particle on the wafer. Y₂O₃ coatings are the reference protective layer for this environment, but the coating can only be as clean and as consistent as the powder it is sprayed from. A feedstock that feeds unevenly or melts incompletely shows up as an inconsistent coating.
Strocera supplies YSP-40 as spherical, agglomerated and sintered Y₂O₃ granules, selected for stable feeding, complete melting in standard APS torches and dense, smooth coatings. Target limits are ≥ 99.99% (4N) on a total oxide basis, Y₂O₃/TREO ≥ 99.995%, D50 15 to 25 µm and Hall flow ≤ 60 s / 50 g. The binder is burnt out during sintering, and residual carbon is reported on the Certificate of Analysis of each batch.
Full Yttria Thermal Spray Powder specTarget specification for qualification batches. Reference APS data will follow with the first qualified batches.
Coating shops and chamber component suppliers qualifying a high-purity yttria feedstock for plasma-facing parts.
Engineers working on this often also evaluate:
Tell us the operating conditions. We'll formulate Yttria Thermal Spray Powder to your application, and ship spray feedstock matched to your process.