World Space Week / / / 4-10 Oct →
Strocera

High-temperature barrier and oxidation-resistant layers.

APS feedstock for high-temperature barrier and oxidation-resistant layers.

STROCERA / / / Yttria Thermal Spray Powder / / / Industrial
[ 01 ]The challenge

A barrier layer has to stay stable at temperature and keep oxygen away from the part beneath it. When the feedstock varies from lot to lot, the coating process has to be adjusted before the layer itself can be assessed.

Schematic, illustrativeYttria Thermal Spray Powder
[ 02 ]The Strocera approach

YSP-40 is cubic Y₂O₃ with no secondary phase detected by XRD, at ≥ 99.99% (4N) and loss on ignition ≤ 0.5%. Y₂O₃ has a literature melting point of approx. 2 425 °C. Barrier performance depends on your torch, parameters and substrate, so it is not specified on the datasheet. Reference APS data will follow with the first qualified batches.

Full Yttria Thermal Spray Powder spec
[ 03 ]Specifications for this use case
Property
Value
Method
Purity, Y₂O₃, total oxide basis
≥ 99.99% (4N), ≤ 100 ppm total impurities
ICP-MS / ICP-OES
Crystalline phase
cubic Y₂O₃ (bixbyite), no secondary phase detected
XRD, Cu Kα
Loss on ignition, 1000 °C
≤ 0.5%
Gravimetric
D50, median
15 to 25 µm
ISO 13320
Hall flow rate
≤ 60 s / 50 g
ASTM B213
[ 04 ]Validation status
Pending

Target specification for qualification batches. Reference APS data will follow with the first qualified batches.

[ 05 ]Customer profile

Coating engineers developing high-temperature barrier and oxidation-resistant layers.

[ 06 ]Adjacent use cases

Engineers working on this often also evaluate:

Bring your specification for High-temperature barrier and oxidation-resistant layers.

Tell us the operating conditions. We'll formulate Yttria Thermal Spray Powder to your application, and ship spray feedstock matched to your process.