World Space Week / / / 4-10 Oct →
Strocera

Protective and release coatings for reactive-metal melting and casting.

Spray feedstock for protective and release coatings in reactive-metal melting and casting.

STROCERA / / / Yttria Thermal Spray Powder / / / Industrial
[ 01 ]The challenge

Tooling in reactive-metal melting and casting needs a barrier between the metal and the part. A sprayed layer can be applied to existing hardware, but it needs a feedstock that feeds steadily and melts completely, so that the layer is consistent across the part.

Schematic, illustrativeYttria Thermal Spray Powder
[ 02 ]The Strocera approach

YSP-40 supplies spherical, agglomerated and sintered Y₂O₃ granules at ≥ 99.99% (4N), D50 15 to 25 µm, Hall flow ≤ 60 s / 50 g. Coating properties depend on torch, parameters and substrate and are not specified on the datasheet. Sample quantities for qualification are 1 to 5 kg per cut.

Full Yttria Thermal Spray Powder spec
[ 03 ]Specifications for this use case
Property
Value
Method
Purity, Y₂O₃, total oxide basis
≥ 99.99% (4N), ≤ 100 ppm total impurities
ICP-MS / ICP-OES
D50, median
15 to 25 µm
ISO 13320
Hall flow rate
≤ 60 s / 50 g
ASTM B213
Apparent density
1.4 to 2.0 g/cm³
ASTM B212
Granule type
spherical, agglomerated and sintered (spray-dried, sintered)
SEM
[ 04 ]Validation status
Pending

Target specification for qualification batches. Reference APS data will follow with the first qualified batches.

[ 05 ]Customer profile

Foundries and coating suppliers working with reactive-metal melting and casting tooling.

[ 06 ]Adjacent use cases

Engineers working on this often also evaluate:

Bring your specification for Protective and release coatings for reactive-metal melting and casting.

Tell us the operating conditions. We'll formulate Yttria Thermal Spray Powder to your application, and ship spray feedstock matched to your process.