World Space Week / / / 4-10 Oct →
Strocera

Crucibles, setters and release coatings for reactive-metal melting.

Fine yttria for crucibles, setters and release coatings in contact with reactive metals.

STROCERA / / / High-Purity Yttrium Oxide / / / Industrial
[ 01 ]The challenge

Reactive-metal melting demands a contact surface that does not contaminate the melt. A crucible, setter or release coating is formed by the user, so the powder has to suit the forming route as well as the chemistry.

Schematic, illustrativeHigh-Purity Yttrium Oxide
[ 02 ]The Strocera approach

YOX-40 supplies fine, soft-agglomerated Y₂O₃ at ≥ 99.99% (4N), with agglomerate D50 0.5 to 1.5 µm. Coarser calcined grades and granulated press-ready powder are available on request. Where a sprayed layer suits the part better, YSP-40 is the thermal-spray grade of the same chemistry.

Full High-Purity Yttrium Oxide spec
[ 03 ]Specifications for this use case
Property
Value
Method
Purity, Y₂O₃, total oxide basis
≥ 99.99% (4N), ≤ 100 ppm total impurities
ICP-MS / ICP-OES
Crystalline phase
cubic Y₂O₃ (bixbyite), no secondary phase detected
XRD, Cu Kα
D50, median (agglomerate)
0.5 to 1.5 µm
ISO 13320, wet
Specific surface area, BET
5 to 15 m²/g
ISO 9277
[ 04 ]Validation status
Pending

Target specification issued for product qualification. Results depend on the host system, forming method and firing schedule.

[ 05 ]Customer profile

Producers of crucibles, setters and release coatings for reactive-metal processing.

[ 06 ]Adjacent use cases

Engineers working on this often also evaluate:

Bring your specification for Crucibles, setters and release coatings for reactive-metal melting.

Tell us the operating conditions. We'll formulate High-Purity Yttrium Oxide to your application, and ship powder matched to your firing schedule.