World Space Week / / / 4-10 Oct →
Strocera

Composite and blended spray feedstock.

Y₂O₃ feedstock for composite and blended spray powders.

STROCERA / / / Yttria Thermal Spray Powder / / / Industrial
[ 01 ]The challenge

A blended or composite spray powder inherits the limits of each component. The yttria fraction needs a known particle size, flow and impurity level, so that the blend can be developed around it.

Schematic, illustrativeYttria Thermal Spray Powder
[ 02 ]The Strocera approach

YSP-40 is supplied at ≥ 99.99% (4N) with D50 15 to 25 µm and D90 ≤ 45 µm. Finer cuts can be produced by classification on request, and a coarser YSP-40/30 cut (D50 ≈ 30 µm) is under development. Tighter limits for individual elements can be agreed per customer specification.

Full Yttria Thermal Spray Powder spec
[ 03 ]Specifications for this use case
Property
Value
Method
Purity, Y₂O₃, total oxide basis
≥ 99.99% (4N), ≤ 100 ppm total impurities
ICP-MS / ICP-OES
Y₂O₃ / TREO
≥ 99.995%
ICP-MS
D50, median
15 to 25 µm
ISO 13320
D90
≤ 45 µm
ISO 13320
Hall flow rate
≤ 60 s / 50 g
ASTM B213
[ 04 ]Validation status
Pending

Target specification for qualification batches. Reference APS data will follow with the first qualified batches.

[ 05 ]Customer profile

Spray powder producers developing Y₂O₃-based composite and blended feedstocks.

[ 06 ]Adjacent use cases

Engineers working on this often also evaluate:

Bring your specification for Composite and blended spray feedstock.

Tell us the operating conditions. We'll formulate Yttria Thermal Spray Powder to your application, and ship spray feedstock matched to your process.