World Space Week / / / 4-10 Oct →
Strocera

Sputtering target feedstock.

Fine, high-purity Y₂O₃ as the starting powder for sputtering and ceramic targets.

STROCERA / / / High-Purity Yttrium Oxide / / / Semiconductor Equipment
[ 01 ]The challenge

A target carries its starting powder's impurities into the film it deposits. Target makers need a powder with published limits on transition metals and other rare-earth oxides, and a particle size that lets the target densify in their own forming and firing route.

Schematic, illustrativeHigh-Purity Yttrium Oxide
[ 02 ]The Strocera approach

YOX-40 is limited to ≤ 100 ppm total impurities, with NiO, CuO, Cr₂O₃, TiO₂ and ZnO at ≤ 2 ppm each and other rare-earth oxides at ≤ 50 ppm. Agglomerate D50 is 0.5 to 1.5 µm and specific surface area 5 to 15 m²/g. Uranium, thorium and ZrO₂ are reported on the Certificate of Analysis. Tighter limits for individual elements can be agreed per customer specification.

Full High-Purity Yttrium Oxide spec
[ 03 ]Specifications for this use case
Property
Value
Method
Purity, Y₂O₃, total oxide basis
≥ 99.99% (4N), ≤ 100 ppm total impurities
ICP-MS / ICP-OES
Y₂O₃ / TREO
≥ 99.995%
ICP-MS
Crystalline phase
cubic Y₂O₃ (bixbyite), no secondary phase detected
XRD, Cu Kα
D50, median (agglomerate)
0.5 to 1.5 µm
ISO 13320, wet
Specific surface area, BET
5 to 15 m²/g
ISO 9277
[ 04 ]Validation status
Pending

Target specification issued for product qualification. Results depend on the host system, forming method and firing schedule.

[ 05 ]Customer profile

Sputtering target and ceramic target manufacturers sourcing a 4N yttria starting powder.

[ 06 ]Adjacent use cases

Engineers working on this often also evaluate:

Bring your specification for Sputtering target feedstock.

Tell us the operating conditions. We'll formulate High-Purity Yttrium Oxide to your application, and ship powder matched to your firing schedule.