World Space Week / / / 4-10 Oct →
Strocera

Transparent Y₂O₃ and YAG ceramics.

Starting powder for transparent Y₂O₃ and YAG ceramics and laser hosts.

STROCERA / / / High-Purity Yttrium Oxide / / / Industrial
[ 01 ]The challenge

Transparency leaves little margin. Residual porosity and secondary phases scatter light, and impurities in the powder can remain in the finished part. Developers of transparent ceramics and laser hosts need a starting powder with a defined phase, a fine particle size and published impurity limits before they begin tuning their own forming and firing route.

Schematic, illustrativeHigh-Purity Yttrium Oxide
[ 02 ]The Strocera approach

YOX-40 is cubic Y₂O₃ (bixbyite) with no secondary phase detected by XRD, at ≥ 99.99% (4N) and Y₂O₃/TREO ≥ 99.995%. Agglomerate D50 is 0.5 to 1.5 µm and specific surface area 5 to 15 m²/g, adjustable on request between approximately 3 and 25 m²/g. Densification and optical properties depend on your host system, forming method and firing schedule, so they are not specified on the datasheet.

Full High-Purity Yttrium Oxide spec
[ 03 ]Specifications for this use case
Property
Value
Method
Purity, Y₂O₃, total oxide basis
≥ 99.99% (4N), ≤ 100 ppm total impurities
ICP-MS / ICP-OES
Y₂O₃ / TREO
≥ 99.995%
ICP-MS
Crystalline phase
cubic Y₂O₃ (bixbyite), no secondary phase detected
XRD, Cu Kα
D50, median (agglomerate)
0.5 to 1.5 µm
ISO 13320, wet
Specific surface area, BET
5 to 15 m²/g
ISO 9277
[ 04 ]Validation status
Pending

Target specification issued for product qualification. Results depend on the host system, forming method and firing schedule.

[ 05 ]Customer profile

Developers of transparent ceramics and laser host materials.

[ 06 ]Adjacent use cases

Engineers working on this often also evaluate:

Bring your specification for Transparent Y₂O₃ and YAG ceramics.

Tell us the operating conditions. We'll formulate High-Purity Yttrium Oxide to your application, and ship powder matched to your firing schedule.