World Space Week / / / 4-10 Oct →
Strocera

Yttria source for YSZ, YAG and EBC formulations.

The yttria source for YSZ, YAG and yttrium-silicate (EBC) formulations.

STROCERA / / / High-Purity Yttrium Oxide / / / Industrial
[ 01 ]The challenge

In a solid-state or co-precipitation synthesis, the yttria source sets the reactivity of the mix and the impurity level of the product. A powder with low or variable surface area reacts unevenly, and it is then hard to tell a formulation problem from a raw-material problem.

Schematic, illustrativeHigh-Purity Yttrium Oxide
[ 02 ]The Strocera approach

YOX-40 is produced by a wet-chemical route and calcined to a fine, soft-agglomerated cubic Y₂O₃ with a specific surface area of 5 to 15 m²/g, and it reacts cleanly in solid-state and co-precipitation syntheses. Calcination temperature can be adjusted on request to move surface area between approximately 3 and 25 m²/g. Each delivery carries a Certificate of Analysis with the measured values.

Full High-Purity Yttrium Oxide spec
[ 03 ]Specifications for this use case
Property
Value
Method
Purity, Y₂O₃, total oxide basis
≥ 99.99% (4N), ≤ 100 ppm total impurities
ICP-MS / ICP-OES
Y₂O₃ / TREO
≥ 99.995%
ICP-MS
Crystalline phase
cubic Y₂O₃ (bixbyite), no secondary phase detected
XRD, Cu Kα
Specific surface area, BET
5 to 15 m²/g
ISO 9277
Loss on ignition, 1000 °C
≤ 1.0%
Gravimetric
[ 04 ]Validation status
Pending

Target specification issued for product qualification. Results depend on the host system, forming method and firing schedule.

[ 05 ]Customer profile

Formulators of stabilised zirconia, YAG and yttrium-silicate environmental barrier materials.

[ 06 ]Adjacent use cases

Engineers working on this often also evaluate:

Bring your specification for Yttria source for YSZ, YAG and EBC formulations.

Tell us the operating conditions. We'll formulate High-Purity Yttrium Oxide to your application, and ship powder matched to your firing schedule.